Flexball Italiana S.r.l.
18
4.5. Trim/Flap option
Flap/trim command can be activated directly from the command station with the buttons ‘+’ and ‘-’. The
commands are sent to the actuator from the command station. The relay card fitted on the actuator box
activates the flap/trim commands on the hydraulic pump.
For installations with two engines, in case of “Synchro” mode operation, the buttons on the right-hand side
operate the trims of both engines simultaneously.
Command station series 3500
Command station series 4200
Push buttons are placed in the back side of
the control lever.
Press with finger 2 to lift up the TRIM
Press with finger 3 is to move down the
TRIM
Command station series 4500
1 engine version
Trim or flap can be activated directly from the command station with “+” and “-“
pushbuttons. These pushbuttons are placed on the side of the left lever.
2 engines version
1 engine version
2 engines version
Trim or flap are tuned with “+” and “-“
pushbuttons placed on the keypad (a
couple for each engine).
It is also possible to command in
Synchro trim or flap of both engines with
the “+” and “-“ push buttons placed on
the side of the left lever.
+
