R 600 VV/RZ 600/R 1800 VR/R 2000
15
Operating instructions
t^okfkd>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=ëíáêêÉêI=
éìää çìí=íÜÉ=ã~áåë=éäìÖK
`^rqflk>
qÜÉ=~î~áä~ÄäÉ=ã~áåë=îçäí~ÖÉ=~åÇ=íÜÉ=îçäí~ÖÉ=
ëéÉÅáÑáÅ~íáçåë=çå=íÜÉ=ê~íáåÖ=éä~íÉ=ãìëí=ÄÉ=íÜÉ=
ë~ãÉK
Before switching on the power tool
Unpack the stirrer and check that no parts
are missing or have been damaged during
transit.
Attach the handle.
Attach stirrer basket.
Attach the handle
Do not use the stirrer until the handle has been
fitted.
Place the handle on the thread and then
screw on clockwise.
Attaching/changing stirrer basket
Type R 600 VV, R 1800 VR, R 2000
Attach the stirrer basket to the drive spindle
using the adapter.
To do this, screw the stirrer basket onto the
drive spindle (
1.
).
Hold the drive spindle using a size 27 open-
ended wrench and tighten the adapter and
the stirrer basket using a size 24 open-
ended wrench (
2.
).
Remove in reverse sequence.
Type RZ 600
The stirrer baskets must be fitted to the
matching drive spindles, otherwise the
functionality of the stirrer is not guaranteed
and the stirrer baskets may jam.
Connect stirrer basket
I
(identifiable by only
one notch) to drive spindle
I
(
1.
).
Insert the pin (
2.
) and roll the rubber ring over
the groove (
3.
).
.
Connect stirrer basket
II
in the same way.
Remove in reverse sequence.
