INSTALLATION INSTRUCTIONS
HOSEDOWN SERIES
IMPORTANT:
READ ALL INSTRUCTIONS THOUROUGHLY AND CAREFULLY PRIOR TO INSTALLATION OF
ESSENTIALS SERIES FIXTURES AND RETAIN FOR FUTURE REFERENCE.
FLEXLIGHTINGSOLUTIONS.COM
913.851.3000
REV 082318
PLATE MOUNT (PLATESS)
INSTALLATION
1.
REFER TO GENERAL INSTRUCTIONS 1 THROUGH 9 AT THE BEGINNING OF THIS SECTION.
2.
INSTALL 3/4" RIGID STEM (PROVIDED BY CONTRACTOR) IN ACCORDANCE WITH LOCAL BUILDING CODES AND AUTHORITY HAVING JURISDICTION.
MAKE SURE THE RIGID STEM IS CAPABLE OF SUPPORTING WEIGHT OF FIXTURE.
3.
RAISE PLATE TO RIGID STEM.
4.
THREAD WASHER (PROVIDED BY CONTRACTOR) ONTO BOTTOM OF THREADED RIGID STEM, SECURING PLATE IN PLACE. FINGER TIGHTEN, THEN
USE WRENCH TO SECURELY TIGHTEN LOCKNUT.
5.
ATTACH SUSPENTION CABLES (FOUR (4) SUPPLIED) TO ALL FOUR (4) MOUNTING TABS FOR 2W, OR TWO (2) TO BOTH MOUNTING RINGS FOR
2N/4N) ON FIXTURE AND ON MOUNTING HOLES ON PLATE. LEVEL FIXTURE PLUMB TO BUILDLING LINES.
6.
MAKE FINAL WIRING CONNECTIONS (REFER TO WIRING INSTRUCTIONS AT END OF THIS SECTION).
INSTALLING OPTIONAL SAFETY CABLE
1.
SECURE SAFETY CABLE (ORDERED SEPARATELY) TO STRUCTURE (NOT PLATE OR EXISTING STEM).
2.
ATTACH SAFETY CABLE TO ONE OF THE MOUNTING TABS.
