INSTALLATION INSTRUCTIONS
HOSEDOWN SERIES
IMPORTANT:
READ ALL INSTRUCTIONS THOUROUGHLY AND CAREFULLY PRIOR TO INSTALLATION OF
ESSENTIALS SERIES FIXTURES AND RETAIN FOR FUTURE REFERENCE.
FLEXLIGHTINGSOLUTIONS.COM
LIGHTING.TECH@FLEXTRONICS.COM
913.851.3000
REV 082318
CUSTOMER SUPPLIED POWER CORD FIELD INSTALLATION
PREPARING TO INSTALL
–
1.
REFER TO GENERAL INSTRUCTIONS AT THE BEGINNING OF THIS SECTION.
2.
REMOVE RUBBER CAP, FIG. 19.
3.
REMOVE LENS
(SEE “LENS REMOVAL AND REPLACEMENT,” BELOW)
AND LOWER/REMOVE TRAY, FIG 23.
4.
INSERT POWER CORD THROUGH APPROPRIATE SEALING OR WATER TIGHT CORD GRIP (PROVIDED BY CONTACTOR)
, FIG’S.
20 AND 21.
5.
PULL THE CORD INTO FIXTURE A MINIMUM OF 6”.
6.
TIGHTEN CORD GRIP PER CORD GRIP INSTRUCTIONS, ENSURING A WATERTIGHT SEAL, FIG. 22.
7.
MAKE FINAL WIRING CONNECTIONS (REFER TO WIRING INSTRUCTIONS AT THE END OF THIS SECTION).
REFER TO LENS REMOVAL AND REPLACEMENT INSTRUCTION IN THIS MANUAL
FIG. 19
FIG. 20
FIG. 23
FIG. 21
FIG. 22