-10-
NOTICE:
The blade may be installed with the
teeth pointing up or down, depending on the
cutting operation.
TO REMOVE THE SAW BLADE (FIG. 4):
Rotate the tool-less blade clamp sleeve in the
direction of the arrow marked on the blade
clamp, the blade will get ejected out.
The tool-less blade clamp sleeve will stop in
place for the future blade installation.
NOTICE:
When removing the saw blade, make
sure the saw blade does not point at any person
or animal to avoid personal injuries.
NOTICE:
Occasionally the tool-less blade clamp
may retract into the saw housing. If this happens,
reattach the battery pack and turn the tool on
by pressing the variable-speed trigger switch to
move the blade clamp into a more accessible
position. Remove the battery pack again.
Fig. 4
Fig. 3b
