FLENDER LOHER DYNAVERT L05 Series, Commissioning And Maintenance Instructions

Page: 61 / 66

DYNAVERT
®
L05 Annex
4BS0516DE-EN/011 Stand/ issue: 25.07.03 61
7.7 Protokol of event memory
FU-No.: Type: Date:
Event memory Event No.:
Date
Time
Trvl.cmd.
| Trvl.cmd.
Travel
| Travel
Set value m/s
| Set value m/s
v-Travel m/s
| v-Travel m/s
I-motor A
| I-motor A
f-motor Hz
| f-motor Hz
V-motor V
| V-motor V
DC-volts V
| DC-volts V
Accel. m/s²
| Accel. m/s²
rest dis. cm
| rest dis. cm
T-motor Nm
| T-motor Nm
control DSP HEX
| control DSP HEX
status DSP HEX
| status DSP HEX
travels
T-inside °C
T-cooler 1 °C
Activat/h
Load kg
DCP Trvl.cmd. HEX
| DCP Trvl.cmd. HEX
Remarks:
Messages
ready yes no
| ready yes no
Brake on off
| Brake on off
levelg.spd. too high o.k.
| levelg.spd. too high o.k.
Trav.contactor on off
| Trav.contactor on off
Relay com.flt. yes no
| Relay com.flt. yes no
Ctrl.inh. yes no
| Ctrl.inh. yes no
f-pulse-lowrg. yes no
| f-pulse-lowrg. yes no
Curr-lowrg. yes no
| Curr-lowrg yes no
Warnings
Tmp.ins.t.high yes no
| Tmp.ins.t.high yes no
Tmp.ins.t.low yes no
| Tmp.ins.t.low yes no
TmpCooler t.hi yes no
| TmpCooler t.hi yes no
TmpCooler t.lo yes no
| TmpCooler t.lo yes no
BrakeRes.Overl yes no
| BrakeRes.Overl yes no
.Motor overtemp yes no
| Motor overtemp yes no
Standstill fan yes no
| Standstill fan yes no
Temp.inside yes no
| Temp.inside yes no
Temp.Sens. KK1 yes no
| Temp.Sens. KK1 yes no
Terminal inputs
Term.inp. SF yes no
| Term.inp. SF yes no
Term.inp. SA yes no
| Term.inp. SA yes no
Term.inp. S1 yes no
| Term.inp. S1 yes no
Term.inp. S2 yes no
| Term.inp. S2 yes no
Term.inp. S3 yes no
| Term.inp. S3 yes no
Term.inp. SR yes no
| Term.inp. SR yes no
Term.inp. SN yes no
| Term.inp. SN yes no
Term.inp. SO yes no
| Term.inp. SO yes no
Term.inp. SU yes no
| Term.inp. SU yes no
Term.inp. SFS yes no
| Term.inp. SFS yes no
Term.inp. SD yes no
| Term.inp. SD yes no
Batt.operation yes no
| Batt.operation yes no
Reference / Name: ___________________________________ Page: _____of: _____