Fleischmann 931884, Manual

Page: 48 / 84

cageclamp side to the track and snapping
in the clip on the far side. Clip "2" is snap-
ped in vice versa (Fig. 8, 9).
As shown in fig. 10, press onto the top of
the cageclamp connectors. That way, on
the front end of the clamp, an opening will
appear, into which the connecting leads
with the unisolated end must be inserted.
Releasing the clamp will thus form the con-
nection. Take care to position the cage-
clamp connectors on the outer side of the
layout to prevent leads from coming across
the tracks. Now you have completed the
connecting of the leads to the clamps of
the track feed clips.
Next we will continue with the setup of the
controller. First connect the round plug of
the mains unit 681301 to the digital ampli-
fier 680801. Then insert the rectangular
plugs into the respective sockets of ampli-
fier and multiMAUS. Finally, plug in the
mains unit into a 240 V outlet and off you go.
48
21-9300-0104.indd 48 04.07.2016 13:45:11