FLAVIA TD 55 VENETA P5 GR, Use And Handling Instructions

Page: 7 / 36

Operation and installation manual Operation and installation manual
DISHWASHERS
5
How to change the program 1. You can change a washing cycle selected, if your
dishwasher has been operating for a short while. If
long, the dishwasher detergent has already been
sprayed. That being the case, you have to add the
detergent
2. Press START / PAUSE. Press and hold “P” more
than 3 seconds to cancel the program you have
selected previously
3. Select a new program desired
4. Close the door. Your dishwasher has been restarted
What to do, if you forgot to put a plate or
a piece of flatware after having started
your dishwasher 1. Carefully open the door to interrupt the dishwasher
operation
2. After you have cut off water supply, fully open the
door
3. Put a plate or a piece of flatware you forgot
4. Close the door
. Your dishwasher will restart in 10
seconds
What to do after power cut during a
washing cycle If your washing program has been interrupted, connect
your dishwasher following the same procedure as for the
first use. Select a program desired again, add agents as
it may be required
Turning off Upon completion of a washing cycle, an audio signal will
be given 8 times, upon which the dishwasher will turn
off. Upon completion of washing, the door indicator will
be on (white). Press ON / OFF
Close the water tap and take dishes
(flatware) out of the baskets ATTENTION: please wait approximately 15 minutes
before you take your dishware out of the baskets. Hot
dish- and flatware are very fragile and can be damaged.
This will also contribute to better drying of dishes. Start
with the lower basket