FLAVIA TD 55 VENETA P5 GR, Use And Handling Instructions

Page: 18 / 36

Operation and installation manual
DISHWASHERS
16
SWITCHING ON THE APPLIANCE
Starting a washing cycle
1. Make sure the dishwasher is connect-
ed to the mains.
2. Make sure the water cock is opened all
the way.
3. Put your dishes (See “Putting the dish-
es”).
4. Fill in the rinsing agent and dishwash-
ing detergent (See “Dishwashing de-
tergents” and “Rinsing agents”).
5. Press ON / OFF button.
6. Press the program selection button,
select a washing cycle desired (See
“Table of operating modes”).
7. Shut the door. Press START / PAUSE.
The program selected will start within 3
sec.
How to cancel or change
the program selected
NOTE: a washing cycle, already started,
can only be changed within few minutes.
Otherwise, the detergent is already used,
water is supplied. Should it happen like this,
refill the detergent doser (See “Dishwash-
ing detergents”).
Open the door, press and hold the program
selection button within 3 sec at least. After
that you can change the previous program
and go to another one. Do not forget to
close the door.
Upon washing
When washing is over, an audio signal will be
given within 8 sec. Turn off the appliance,
pressing ON / OFF. Wait several minutes to let
dishes cool down and dry before taking it out
of the dishwasher.
Forgot to put a plate?
You can put a forgotten plate only before
the detergent is sprayed.
1.
Open the door to interrupt a washing
cycle.