FLAVIA TD 55 VENETA P5 GR, Use And Handling Instructions

Page: 25 / 36

Operation and installation manual Operation and installation manual
DISHWASHERS
23
U-JOINT CONNECTION
How to connect a U-joint
There is a new U-joint to be used to
connect the appliance to a water supply
source.
Water pressure values may range from
0.04 to 1 MPa. If the water pressure is below
a minimum value, contact a representative
of your service center.
1.
Pull the U-joint and all its hoses from
the compartment on the rear wall of
the dishwasher.
2. Attach the U-joint to the water cock,
using 3/4" screws.
3. Turn the water cock all the way to open
it before starting the dishwasher.
How to disconnect the U-joint
from the adapter
1. Shut off water supply.
2. Decrease water pressure, pressing the
pressure release button. This will prevent
water splashing.
3. Remove the U-joint from the water cock,
squeezing the clamp on the upper part of
the U-joint.
How to disconnect the dishwasher
1. Unplug the dishwasher.
2. Disconnect the U-joint from the cock
adapter.
NOTE: upon completion of the last
rinsing, you may remove the U-joint
and store it.