4.3
Removing / Replacing the Pilot Assembly.
4.3.1
Isolate the gas supply, disconnect the thermocouple wires from the
valve and the HT ignition lead.
4.3.2
Loosen the pilot nut and remove two screws retaining the pilot
assembly.
4.3.3
Disconnect the ignition lead from the electrode and remove the
thermocouple from the pilot body
4.3.4
Re-assemble in reverse order with a new pilot gasket ensuring an even
seal around the pilot is obtained and carry out a gas tightness test. Re-
fit logs as shown in section 3.
4.3.5
Close the door, check operation of the stove.
33
