35
3.2.6 Rotate
Select the target object and rotate the object by the following two methods:
Method 1：
Method 2：
lick the [Rotate] icon on the left and three mutually perpendicular rings
appear around the object Click one ring and rotate on the present axis, you
will see the rotation angle and direction in the center of circle. In this way,
you could make the model rotate on X/Y/Z axis.
Click the [Rotate] icon on the left, and then enter into rotating angel values in
X/Y/Z axes positioning. Click [Reset] to reset rotating angel values.
3.2.7 Scale
Select the target object and scale the object by the following two methods:
Method 1：
Method 2：
Note: If the [Uniform Scaling] radio button is clicked, it will scale the model in equal
proportion when changing value in any positioning of the model. Otherwise it will only
change the value of the corresponding positioning.
Click the [Scale] icon on the left, hold down the left mouse button and scale
the model. The corresponding values will display near the object..
Click the [Scale] icon on the left and then enter into scale values in X/Y/Z axes
positioning. Click the [Maximum] button to get largest size possible for
building. Click [Reset] to reset the size of model.
