5 / 22
The sets are monitored and controled via a serie (RS485) digital bus called J-Bus (Green wire on diagram)
This bus is constructed with a shielded twist pair cable.
This bus allows JX 5600 to :
1.
Command the sets
2.
Query the sets
JX 5600 Rear panel connector
(Jbus connections).
It is necessary to connect a J-Bus Load on each “end of line” to insure a perfect impedance for the digital
signal. 3 J-Bus Loads are delivered with eachJX 5600
1
.
1
If you need spare parts do not hesitate to ask your reseller or [email protected]
Power Station
JX 5600
Connect a J-Bus Load here
Connect a J-Bus Load here
It is recommanded to insert a
« signal repeater » every 1 000 m
Connect to J-Bus B
Connect to J-Bus A
GND
Summary of Contents for JX 5600
Page 18: ...18 22 Configuration frame Maintenance frame...
Page 19: ...19 22 Broadcast frame...
