FLASHELEK JX 5600, User Manual, Page: 3 / 22

3 / 22
1 Generals
The JX 5600 set has to be used in conjonction either with JX 2360 or JX 2600 families Flash Light Power
Sets.
1.1
Physical wiring
It is used to monitor and remote control a SFLS assembly such as described underneath :
The Power Station supplies the sets with main 240V AC +/- 10 % (Black wire on diagram).
The mains cable has to be able to supply 0,5 rms A (220 V AC) or 1 rms A (110 V AC) for each flash lamp.
This power supply is maintained continuously on line, as the eventual heater resistor may has to be supplied.
The JX 5600 will be in charge of switching On and Off the flashes.
Power Station
JX 5600