manualshive.com logo in svg

Flash FLASHV1, User Manual, Page: 15 / 60

Share
Download
Flash FLASHV1 User Manual Download Page 15

13

Flash is not responsible for incidental or consequential 
damages, including, damages for personal injury, property 
damage, or economic losses, whether based on contract, 
warranty, negligence, product liability, or any other theory.

Some states or countries do not allow exclusions of inciden-
tal or consequential damages, so the above exclusion may 
not apply to you.

Any claim against this warranty must be made through Flash. 
To initiate a warranty claim please contact Flash at 
[email protected].

RETURN POLICY

Bikes may be returned within 30 days of bike user account 
setup, or within 90 days of receiving the bike, 

whichever 

occurs first.

Accessory items purchased as standalone products may be 
returned within 30 days of receiving shipment.

To qualify for a full refund, all products must be in new, un-
used condition with its original packaging. Proof of purchase 
is required with original receipt. Any refund will be applied to 

 the original credit card used in the purchase transaction.

 

Summary of Contents for FLASHV1





























































Reviews:

No comments