12
Installation and
operating instructions
FLAMCO-FILL PE INSTALLATION AND OPERATING INSTRUCTIONS
TP.04/02/09.EN
Edition 2009 / EXP
6.3
Working principle controller
A
B
C
D
Start up
Switch off an installed refill equipment. Close the
•
inflow valves.
Switch on the controller (D).
•
A Display
B Error LED
C Navigation wheel
D ON/OFF switch controller
Use the navigation wheel (C) to navigate through the
menus an to confirm the input. The display (A) shows the
menus. In case of errors the error LED (B) is on.
P
8,8 bar
Auto
Liter
%
100
2 sec...
Hold down the navigation wheel for two seconds
•
to go to the process display, whatever the cursor
position.
P
8,8 bar
Auto
Liter
%
100
P
8,8 bar
Auto
Liter
%
100
In case of errors the process display switches
•
from [SYSTEM] to [ERROR] and the LED is on.
The error messages, minimum water level,
•
minimum pressure alarm are consistent by the first
start of operation.
It is possible to turn the wheel to switch between
•
[SYSTEM] and [ERROR].
When [ERROR] is displayed press the wheel to
•
go to the error list. In case of more than one error,
scroll through the errors. All errors are shown in
accordance of appearance.
When [SYSTEM] is displayed, press the wheel to
•
go to the option menu.
