25
OWNER’S MANUAL
NEUTON™
TROUBLESHOOTING
Problem
Action
Pump Air Locks
The pump is vented by rotating the center screw on the pump a single
turn counterclockwise (See
Figure 11
) and allowing a drop of water to
escape . Tighten the vent screw when complete .
No flow/movement in actuator
Check valve and actuator replacement to ensure valve and actuator are
aligned properly .
Valve and Actuator Replacement
See the following section “Valve and Actuator Replacement” for
instructions .
FIGURE 11.
If the pump air locks, manually rotate the center
cap on the pump to vent .
