Flaem Basic2 RF6, Operating Instructions Manual

Page: 9 / 56

7
ENGLISH
the nosepiece, mask or newborn set.
4. Start the device (see its operating instructions). Gently take a deep breath; we recom-
mend holding your breath for an instant to allow the inhaled drops of aerosol to deposit.
Then exhale slowly.
5. Once the process is complete, switch off the device
ATTENTION:
If after the therapy session an evident deposit of moisture forms within the
pipe (12), detach the pipe from the nebuliser and dry it with ventilation from the said com-
pressor; this operation prevents possible proliferation of mould inside the pipe.
SOFTTOUCH FACE MASKS
During the inspiratory phase,
the tab , acting as a Dispersion
Limiting Device
, bends inwards
towards the mask.
During the expiratory phase, the
tab
,
acting as a Dispersion Limiting De-
vice
, bends outwards from the mask.
SoftTouch
masks have an outer edge made of
soft bio-
compatible material that ensures excellent adherence to
the face, and is also equipped with an
innovative Disper-
sion Limiting Device . These distinctive elements that dis-
tinguish it allow greater sedimentation of medication in the
patient and also limit dispersion .
Soft
biocompatible
material
Dispersion
Limiting Vent
HOW TO USE THE “RF6 Basic
2
” DUAL SPEED NEBULISER
Due to the geometry inside the nebuliser it delivers a particle size providing effective
treatment of the entire respiratory tract.
The RF6 Basic
2
nebuliser is especially suitable for paediatric use because the non-spill
system prevents the medicine from leaking out even if it accidently tips over (tested
to work with up to 5 ml of product, which is the average dose of the most common
therapeutic applications). The nebuliser can deliver the medicine in 2 ways:
“standard mode”
for excellent delivery and minimum
medication waste.
“high speed mode ”
for faster administration time.