FKI GL 9000 Series, User Manual

Page: 8 / 31

8
Programming of temperatures:
1. Press [3] and hold for more than 10 sec. upper display will now show -3 –
2. Press button [1] to show the operation set temperature for the upper pan. Change the set-
ting by p or -.
3. Press button [2] to show the operation set temperature for the lower pan. Change the set-
ting by p or -.
4. Press button [3] to show the standby set temperature for both pans. Change the setting by
p or -. Notice! Standby temperature shall be set close to the operation temperature
to avoid waiting for the temperature to rise when going from stand by to normal.
5. The program will return to the menu after 5 seconds. Wait until this happens and
changes are saved.
6. To leave the menu press [Reset].
.
Factory settings:
Standby temp. 240 °C
Normal temp.
upper pan
250 °C
Normal temp.
lower pan
240 °C
Program 1 130 sec.
Program 2 130 sec.
Program 3 130 sec.
5.3. Locking display
The display shows as well in standby as in normal mode the temperature off the lower pan. Show-
ing the temperature of the upper pan will occur shortly when turning from standby to normal opera-
tion.
During frying, there are major temperature fluctuations, which is quite normal. To let the user not
need to become confused about this, the view of the temperature is locked so that temperatures
above the preset appears as the preset. This means that when temperature exceeds the preset
temperature, this excess will not be displayed.
The lock can be revoked by in the stand-by mode to keep the ON button pressed for min. 10 sec.
The next time the contact grill off at OFF and switching ON will lock again be active.