FKI GL 9000 Series, User Manual

Page: 11 / 31

11
7. Maintenance, fault-finding and repair
7.1. Cleaining and order
It is important that the fat drawer is regularly emptied of excess fat, as this will overflow.
Use the provided spatula to periodically scrape excess grease into the grease drain. If possible,
use paper to dry pans of, like after every 5th-10th frying.
Daily cleaning is performed when the contact grill has cooled of. Dry cabinets with a damp cloth
with a mild detergent. Wipe dry with a dry cloth or paper.
Grease drawer is emptied and cleaned in hot water with a mild detergent if necessary. Or in the
dishwasher.
Once a day must pans thoroughly be cleaned so that all food residues are removed. If possible,
use a stainless steel sponge with mild detergent. The pan must be completely cleaned and appear
"blank". Wipe dry with clean cloth or paper.
If Teflon sheet is used in the pans, clean them with a damp cloth with a mild cleaning agent. We
recommend using Teflon sheet (supplied) as it prevents burn-in, and facilitate subsequent clean-
ing.
7.2. Preventive maintenannce
Replacing the Teflon sheet on the upper pan is performed as needed. Always do this when the
contact grill is cold.
The teflon sheet is mounted with adhesive tape. Remove the foil from the pan on both sides.
Possibly residual adhesive from the tape, can be removed with a scraper. Heating of the machine
to about 50°C can ease that process. Use a damp cloth or steel sponge with detergent to com-
pletely remove glue residue. Remember to turn off the machine before it becomes too hot.
When the contact grill again cools down, the new film is mounted. Remove the tape on one side
and place the teflon sheet on the edge of the upper pan cabinet. Remove the tape on the other
side, and set the adhesive film in place.