FKI GL 9000 Series, User Manual

Page: 10 / 31

10
6. Transport and installation
6.1. Transport
The contact grill should only be transported when fastened to a pallet or similar.
6.2. Installation
The contact grill is to be installed on flat ground, counter top or the like. The legs shall be adjusted
so that the contact grill is higher in the rear than in front, so excess fat can drain to the fat drain.
6.3.
Demands to the installation place
The surface of the contact grill must have sufficient capacity. See the technical data section. 3.4.
In particular, if the counter top is hanging on the wall be aware that this is firmly attached and that
the wall is suitable for fixing of heavy loads.
Note that there must be free passage of air behind the machine, underneath the machine and in
front of the machine. Do not place any objects, cloths, gloves or the like that can prevent a free cir-
culation of air.
6.4. Connection
Only authorized personnel shall connect the contact grill. Plug are not part of the delivery but can
be ordered separately.
Be aware that the installation is done properly with adequate fuse and be-protection against fault
current and grounding.