Fitzgerald & Long Sentry, User Manual

Page: 28 / 113

Section 1 - 10 SENTRY User’s Guide
Fitzgerald & Long
5.
“Group (GID) XXXXX on /ZZZZZ does not exist.”
- The group number “XXXXX” is the
registered group for a disk object whose path is “/ZZZZZ”. However, the group does not exist in
SENTRY. Possibly, the group once existed but has been deleted. The group for this disk object should be
replaced with a valid group on the system. Alternatively, a new or existing group could be assigned the
same group number (GID).
6.
“Command /VVVVV does not have any groups or users assigned.”
- The database
command whose path is “/VVVVV” has only “other” access rights assigned. No users or groups are
referenced in the command’s protection. This may be because only “other” access rights are needed;
everyone may have the same rights to the command. However, you should review the command protection
to be sure it is what you intend.
7. .
“User (UID) XXXXX on command /VVVVV does not exist.”
- The user ID number
“XXXXX” is referenced in the protection for a database command whose path is “/VVVVV”. However,
there is no user who is assigned this user ID number. Possibly, there once was a user but he has been
deleted. The user in this command’s protection should be replaced with a valid user on the system.
Alternatively, a new or existing user could be assigned the same user ID number (UID).
8.
“Group (GID) XXXXX on command /VVVVV does not exist.”
- The group number “XXXXX”
is referenced in the protection for a database command whose path is “/ZZZZZ”. However, the group does
not exist in SENTRY. Possibly, the group once existed but has been deleted. The group in this
command’s protection should be replaced with a valid group on the system. Alternatively, a new or
existing group could be assigned the same group number (GID).
As the validation program progresses four messages will appear. These are:
Validating user profiles
Validating groups
Validating file owners & groups
Validating COMMANDs
When these four sections of the validation program are completed SENTRY will display “
Problems
found during validation, See Validation Report for Details. ” The message “ Database Invalid ”
will appear at the bottom of the screen if FATAL errors are encountered. If only WARNINGS are found
the message displayed is “
Questionable data found during validation. ”