Fitzgerald & Long Sentry, User Manual

Page: 100 / 113

Section 4 - 10 SENTRY User’s Guide
Fitzgerald & Long
4.4 REBUILD CROSS REFERENCE FILES
SENTRY maintains a number of traditional inverted lists which are used for cross referencing. When you
use the “@” function you are accessing one of these lists. Should you encounter a list where an item
appears as “NOT FOUND” or an item doesn’t appear which should, you should rebuild these lists through
this program. This message indicates that a reference to an item exists but the item itself is missing. When
a process is interrupted through a program error, machine failure or “killing” the process, the result may be
that the cross reference files are not updated properly. Therefore, we have provided this “cleanup”
program just in case one of these events should occur.
REBUILD.INVERTS SENTRY Cross Reference Rebuild 09/18/00
Enter “OK” to start the rebuild process or “<ESC>“ to exit:
Figure 45 - This is an example of the “Cross Reference Rebuild” screen.
Enter “
OK
” when you wish to start the rebuild process. Enter <ESC> to exit this screen.