Fitzgerald & Long Sentry, User Manual

Page: 66 / 113

Section 2 - 36 SENTRY User’s Guide
Fitzgerald & Long
X - Execute from inside a program only
UX - Both use at database prompt and from within a program
ALL - Unlimited use
NONE - No use
The default protection is “
NONE
”.
4. Users - Enter the user ID for which you wish to define protection rights. The user ID must already
exist on the SENTRY database. Type “@ name” for a listing of all user IDs having “name” in their user
name. Type "
@
" for a listing of all user IDs on the system.
To remove a user from the protection list, enter the line number associated with that user and then enter a
space, followed by <RETURN>. Enter <RETURN> to exit this prompt.
After each user ID is entered, you will be prompted for access rights for that user. The default is "
ALL
".
5.
User Rights - Enter the access rights for the user. The possible choices are:
U - Use at database prompt only
X - Execute from inside a program only
UX - Both use at database prompt and from within a program
ALL - Unlimited use
NONE - No use
The default protection is "
ALL
".
6.
Groups - Enter the names of the groups who are allowed to use this VOC item. The group(s) must
already exist on the SENTRY database. Enter "
@
" for a list of all defined groups. To remove a group,
enter a space, then <RETURN>. To replace a group simply type over the field to be replaced. After each
group is entered, you will be prompted for access rights for that group. The default is "
ALL
". Entering
<RETURN> at the rights prompt selects the default protection.
7.
Group Rights - Enter the access rights for the group. The possible choices are:
U - Use at database prompt only
X - Execute from inside a program only
UX - Both use at database prompt and from within a program
ALL - Unlimited use
NONE - No use
The default protection is "
ALL
".