9
Assembly is now complete.
IMPORTANT:
Please read page 12 before beginning
your workout for important instructions on
how to use your Recumbent Bike.
STEP 6 – Attaching the Handlebar and Backrest
a)
Attach Handlebar to Seat Support Frame Bracket using two Bolts with a Spring and a Flat Washer
on each Bolt.
Note: Do not pinch the wires.
b)
Connect Handlebar Pulse Wire to Long Extension Pulse Wire coming from the Adjustment Tube.
c)
Attach Backrest with four bolts to the Brackets on the Seat Support Frame.
Figure 6 -
Install Handlebar and Backrest
Figure 7 -
AC Adapter
STEP 7 – Plugging in the AC Adapter
Attach the AC Adapter to the input located on
the front of the bike. Then, plug the Adapter into a
110 Volt outlet.
seat assembly
backrest
seat support frame
seat support
frame bracket
M8 x 20mm
phillips bolt
M6 x 20mm phillips bolt
adjustment
tube
M8 spring washer
M8 flat washer
b
b
long extension
pulse wire
handlebar
handlebar
pulse wire
main
frame
AC adapter
