25
SPECIFICATIONS
TIME ---------------------------------------------------- 00:00-99:59 MIN:SEC
SPEED ------------------------------------------------- 0.0-999.9 MPH
DISTANCE -------------------------------------------- 0.00-99.99 MILE
CALORIE ---------------------------------------------- 0.0-999.9 KCAL
PULSE ------------------------------------------------- 40-200 BPM
USING YOUR COMPUTER
The computer can be activated by pressing the MODE button or by
pedaling. If you leave the equipment idle for 4 minutes, the power will
turn off automatically.
MODE BUTTON FUNCTIONS:
Press the MODE button once to select the desired function of the computer.
Press and hold the MODE button for 4 seconds to reset all data values.
CONSOLE FUNCTIONS:
SCAN:
Press the MODE button until the arrow points to SCAN. The console will
automatically scan through each function except the PULSE functions every 6 seconds.
TIME:
Press the MODE button until the arrow points to TIME. The console will display your
elapsed workout time in minutes and seconds.
SPEED:
Press the MODE button until the arrow points to SPEED. The console will display
the current training speed.
DISTANCE:
Press the MODE button until the arrow points to DISTANCE. The console will
display the cumulative distance traveled during the workout.
CALORIE:
Press the MODE button until the arrow points to CALORIE. The console will
display the ESTIMATED number of calories you have burned during the workout. Note that
the readings are only estimates and there are many factors that can’t be accounted for
such as fitness level, body fat percentage, age, weight, and gender.
PULSE:
Press the MODE button until the arrow points to PULSE. The console will display
your current heart rate readings. This will work ONLY if BOTH hands are gripping the
hand-pulse sensors. No readings or inaccurate readings may occur if only one hand is
gripping the hand pulse sensor.
HOW TO INSTALL THE BATTERIES:
1. Remove the battery cover on the back of the computer console.
2. Place two "SIZE-AA" batteries into the battery mold.
3. Ensure that the batteries are correctly positioned and the battery springs are in physical
contact with the batteries and are in the right orientation.
4. Replace the battery cover on to the back of the console.
5. If the display is illegible or only partial segment appears, remove the batteries and wait 15
seconds before reinstalling.
COMPUTER CONSOLE
Summary of Contents for AIR ELLIPTICAL
Page 5: ...3 LABEL PLACEMENTS ...
Page 8: ...6 OVERVIEW DRAWING ...
Page 11: ...9 HARDWARE TOOLS PACK ...