.
ASSEMBLY INSTRUCTION
.
.
1.
Install Stabilizers
Remove Main Frame (1) and all components
and place on a clean durable surface. Note: all
mounting hardware is pre-installed for easy
matching during assembly. Tools are provided
•
Unlock Main Frame (1) to “Open” position
by pulling Frame Lock Pin (19).
•
Install front and rear stabilizers (5) , (8) to
Main Frame (1). Tighten hex nuts securely.
Rear Stabilizer has transport wheels.
2.
Install Pedals
•
Note: Left Pedal installs counter
clockwise.
Install by rotating to
LEFT. Use care that Pedal Shaft is
Perpendicular to Crank Shaft. Use
supplied wrench to tighten. Check
pedals often for tightness when new.
•
Note:
Crank arms should be checked
for tightness using 14mm socket after
first couple hours of use.
3. Install Seat Tube and Saddle
•
Saddle (52) is mounted to Seat Tube (3)
using Nut (40) and Washer (31).
•
Height is adjusted using Knob (65).
•
Note
: FitDesk is supplied with saddle
height extender for more comfortable leg
Tip: Lower saddle to allow for frame lock
pin (19) to lock in closed position
Summary of Contents for FD-X-003
Page 8: ...EXPLOSION DRAWING...
