-
INSTALL DESK
1.
Line up slots on bottom of Desk 2. Press Desk down and forward direction 3. Slip cover over
front and pull down over rear
.
Tip: Resistance knob is a
micro adjustable system
and should be set to “0”
then count number of turns
as you increase resistance
for
recording
resistance
level
Step 4:
Install Han Desk + Meter
•
Install Handlebar (4) using Bolt (28)
and Washer (34). Tighten securely
using 5mm hex wrench.
•
Install Desk (6) by spreading at base
and firmly pressing down and forward
on handlebar.
•
Install cover over front of Desk first
then pulling over rear.
Note
:
o
Cover should be placed over
handlebar
o
Cover can be removed for easy
washing.
•
Slide meter on hook.
•
Wrap wire over back of handlebar &
plug in to Main Frame End Wire.
See all our accessories at www.fitdesk.net
-
Seat back
-
Exercise bands
-
Stress grips
Our goal is to provide products that can improve your health and productivity. Let us know
how we are doing by leaving a review. Thank you!
Have an assembly question? email: [email protected] with a picture showing
what is challenge.
RevoInnovatiaons LLC
Summary of Contents for FD-X-003
Page 8: ...EXPLOSION DRAWING...
