6
ASSEMBLY INSTRUCTIONS
STEP 4
1. Lock all above bolt tightly in
upright and computer;
2. Use wrench with screw
driver(16), bolt(28) to lock the
left base cover 、71、into the
base frame.
3. Right side is same as the left
side.
4. Restrengthen and lock the A /
B screws in the left picture.
Note: The base cover needs to
be fastened to the upright.
STEP 3
1. Connect the communication
lines C and D one by one;
2. Then put the panel
assembly(7) into console
board assembly(6) and
lock the bolt (40) , Spring
washer(24), Flat washer (20)
into panel assembly(7)
Summary of Contents for TF-D6501
Page 20: ...20 EXPLODED DRAWING...
Page 25: ...25...
