background image

3

IMPORTANT SAFETY INFORMATION

Warning: We suggest that you should consult with your physician or health professional 

before starting your workout, especially for the age up to 35 old or health problem 

related people. We take no responsible for any troubles or hurts if you don’t following our 

specification. Treadmill should be carefully assembled and covered the motor shield, then 

connect to the power.

Attention: 

1.  Ensuring the safety clamps were attached to the clothing or belts before using the treadmill.

2.  Please do not insert any items to any part of the equipment, which would damage the 

equipment. 

3.  Position the treadmill on a clear level surface. Do not place the treadmill on thick carpet as it 

may interfere with proper ventilation. Do not place the treadmill near water or outdoors.

4.  Never start the treadmill while you are standing on the walking belt. After turning the power 

on and adjusting the speed control, there may be a pause before the walking belt begins to 

move, always stand on the foot rails on the sides of the frame until the belt is moving.

5.  Wear appropriate clothing when exercising on the treadmill. Do not wear long, loose fitting 

clothing that may be caught in the treadmill. Always wear running or aerobic shoes with 

rubber soles.

6.  Keep the children and pets away from the treadmill while starting workout.

7.  Don’t exercise in 40-Mints after dinner. 

8.  The equipment is suitable for adults, Juveniles need be accompanied with adults while 

workout.

9.  You must hold on to the handrails until you become comfortable and familiar with the 

treadmill when first start the workout.

10.  Treadmill is indoor-using equipment, not outdoor-using for avoiding damage. Keep the 

store-place clean and flat, drying. Prohibiting other purpose of using, only for workout.

11.  Please purchase the power-line to the distributor or contact with us directly, for the power-

line only equip to the treadmill.

12.  If the treadmill suddenly increase in speed due to an electronics failure or the speed being 

inadvertently increased, the treadmill will come to a sudden stop when the pull pin is 

disengaged from the console.

13.  Do not connect the line to the middle of cable; do not lengthen cable or change the cable 

plug; do not put any heavy thing on cable or put the cable near the heat source; forbid using 

socket with several holes, these may cause fire or people may be hurt by the power.

14.  Cut off the power when the equipment is not used. When the power is cut off , do not pull 

the power line to keep the wire in good condition.Insert the plug to the socket with the 

safety ground circuit, for the power-line is professional equipment .You must contact with 

the professional people directly while the line is damaged.

15.  This Treadmill only for home-using. 

16.  Safety area behind the treadmill: 1000*2000MM

Summary of Contents for TF-D6501


























Reviews: