Fit4Home TF-306A, User Manual

Page: 6 / 11

6
OPERATING THE COMPUTER
SPECIFICATIONS
:
You can set the computer of your STEPPER by pressing the button to display the following
functions:
STEP/MIN ( or STRIDES/MIN): Display strides in every minute
SCAN : Scan each function in sequence
TIME: Determine the length of workout session
CALORIES: Show the calories burned.
COUNT: Accumulate the number of stride during workout session
Noted:
1. The computer turns off automatically when the sensor has no signal input or no key are
pressed for approximately 4 minutes.
2. The computer can be reset by changing battery or pressing the MODE key for 3 seconds.
HOW TO REPLACE BATTERY:
1. Take the computer off the unit (A).
2. Remove battery.
3. Replace with a new battery and make sure the battery is positioned correctly (B).
4. The put the computer back into the original position and make sure the computer is
completely set down in position (C).