12
ASSEMBLY INSTRUCTIONS
STEP 4
1. Attach the Left Butterfly Arm(9)to the indicated Upright(1)with the M10x110L Bolt(17)three
M10 Washers(23), two Plastic Bushings(35) and a M10 Nylon Locknut(27). Do not overtighten
the Locknuts; the Butterfly Arms must be able to pivot easily.
2. Insert the Tube for Pad(13)into a hole in the Butterfly Arm(9) Slide a Form Pad(38) onto the
Tube for Pad(13). Insert the Clip(41) into the Butterfly Arm(9). Repeat this step with the Right
Butterfly Arm(7).
ATTENTION: Make sure that all parts are properly tightened before the weight bench is used. The
use of all remaining parts will be explained in ADJUSTMENTS starting on the next page.