11
ASSEMBLY INSTRUCTIONS
STEP 3
1. Insert the Leg Support(6)into the Bench Leg (5), with the Knob (37).Do not overtighten the
Locknut; the Leg Lever must be able to pivot easily.
2. Insert the leg lever(7)to the Leg Support(6), with the M10x60L Bolt(16), two M10 Washers(23),
a nd an M10 Nylon Locknut(27), Do not overtighten the Locknut; the Leg Lever must be able
to pivot easily.
3. Insert a Pad Tube(12)Slide two Foam Pads(38)onto the Pad Tube.Repeat this step with the
other Pad Tubes on the Leg Lever(7). Do not overtighten the Locknut; the Leg Lever must be
able to pivot easily.