INSTRUCTION MANUAL
FIT DISPLAY C FIT REMOTE BASIC
Error code
Displayed error message
Action/limitation
0C-02
Remote-Display Identification
Error
1. Re-start the system.
2. Switch off system.
3. Remove display from the mount, check contacts
and clean if necessary.
4. Re-insert display and start system.
5. Contact your specialist dealer if the problem
persists.
0C-03, 0C-04,
0C-05, 0C-06
Remote-Battery Identification
Error
1. Restart system.
2. Switch off system.
3. Remove display from the mount,
4. check contacts and clean if necessary.
5. Re-insert battery and start system.
6. Contact your specialist dealer if the problem
persists.
0C-07
Remote-Speednode Identification
Error
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
0C-08
Remote-Gear Shift Identification
Error
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
0C-0A
Remote-Charger Identification
Error
1. Re-start the system.
2. Switch off system.
3. Disconnect charger from system and socket.
4. Wait until the status LED goes out.
5. Check plug contacts on the e-bike and charger
and clean if necessary.
6. Plug charger into the socket again..
7. Plug charger into the system again and start
system up.
8. Contact your specialist dealer if the problem
persists.
0C-0B
Remote-Lock Identification Error
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
0D-01
Motor Authentication Error
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
0D-02
Display authentication error
1. Re-start the system.
2. Switch off system.
3. Remove display from the mount, check contacts
and clean if necessary.
4. Re-insert display and start system.
5. Contact your specialist dealer if the problem
persists.
0D-03, 0D-04,
0D-05, 0D-06
Battery Authentication Error
1. Restart system.
2. Switch off system.
3. Remove display from the mount, check contacts
and clean if necessary.
4. Re-insert battery and start system.
5. Contact your specialist dealer if the problem
persists.
0D-07
Speednode Authentication Error
1. Re-start the system.
2. Contact your specialist dealer if the problem
persists.
FIT_Manual_Display_Comfort_Remote_Basic_V1_en | Version 01 | 04.04.2022
25
