INSTRUCTION MANUAL
FIT DISPLAY C FIT REMOTE BASIC
9
ERROR MESSAGES
9.1
GENERAL INFORMATION
The parts of the e-bike system are permanently monitored during use and charging. The error code is shown on
the display when an error is detected. Press on the selector button to acknowledge the error and switch back to
the default screen on the display. If the error cannot be acknowledged, use the table in section 9.3.1 to eliminate
it or contact your specialist dealer. Power assistance is automatically stopped where necessary depending on the
specific error code. You can still use the e-bike conventionally as a normal bicycle even if the motor no longer provides
assistance. An error can be clearly categorised with the displayed category and the displayed code. A text which
indicates the error category is also always displayed.
9.2
STATUS LED ON OPERATING ELEMENT AND DISPLAY
The operating element and the display each feature a status LED to indicate error statuses. The operating element’s
LED is located in the selector button. It is in the top left-hand corner in Display Compact and in the top right-hand
corner in Display Comfort.
The statuses are listed in the following table:
Colour
Flash sequence
Status
Green
Continuously lit
System must be connected to the maintenance tool at the
specialist dealer’s.
Red
Continuously lit
Re-start the system if the status LED still lights up red. Have
component replaced at the specialist dealer’s.
Red
Flashing
Re-start the system if the status LED still flashes red. Have
component replaced at the specialist dealer’s.
9.3
ERROR SCREEN ON THE DISPLAY
1. Error code
2. Error message
FIT_Manual_Display_Comfort_Remote_Basic_V1_en | Version 01 | 04.04.2022
23