INSTRUCTION MANUAL
FIT DISPLAY C FIT REMOTE BASIC
Time
You can use the Clock menu to change the current time. You can change the numbers by pressing the – or + on the
level of assistance button. You can use the selector button to select the number you wish to change. You need to
press on the selector button to save the selected time and exit the Clock menu. If you press Cancel, you exit the menu
without saving any changes.
Date
You can use the Date menu to change the current date. You can change the numbers by pressing the – or + on the
level of assistance button. You can use the selector button to select the number you wish to change. You need to
press on the selector button to save the selected date and exit the menu. If you press Cancel, you exit the menu
without saving any changes.
Units
You can use the Units menu to choose between the metric and imperial system. The following units are changed:
Measured variable
Metric
Imperial
Distance
km
mi
Speed
km/h
mph
Energy consumption
Wh/km
Wh/mi
Temperature
°C
°F
Height above sea level
m.a.s.l.
FAMSL
Time format
You can switch between 12h and 24h time display.
Menu – Connectivity
You will find information on the availability and use of connectable accessories on the e-bike manufacturer’s website.
Menu – My Bike
You can make adjustments to the user-related settings in this menu.
Assistance
You can custom-adjust e-bike assistance. You can use the selector button to configure the required assistance in
the Assistance menu. The configured Assistance setting always has a similar impact on the three levels (ECO, STD
and AUTO). The motor always delivers full assistance when set to “HIGH” irrespective of the individual assistance
setting. If all bars on the screen are black, the maximum assistance is configured in the ECO, STD and AUTO levels
of assistance. This setting means a shorter range. If only the bar on the far left of the screen is black, the maximum
assistance is configured in the ECO, STD and AUTO levels of assistance. This setting allows the maximum possible
range in the ECO assistance mode. Press the selector button to save the setting.
Calibration Altitude
The altimeter is calibrated in the Calibration Altitude menu. Important: Altitude measurement depends on the air
pressure and deviations may arise if the air pressure fluctuates. We recommend calibrating the altimeter if there is a
sudden change in the weather.
Auto Backlight
You can use this menu to select between the display backlight automatically adjusted to the ambient light (ON) or the
display backlight manually adjusted within a range between 10 and 100% (OFF).
You need to press on the selector button to save the selected backlight and exit the menu. If you press Cancel, you
exit the menu without saving the settings.
FIT_Manual_Display_Comfort_Remote_Basic_V1_en | Version 01 | 04.04.2022
21
