Fisher PCG-06, Installation, Operation And Service Manual, Page: 14 / 66

HYDRONIC CASSETTE 14
THE INSTALLATION MANUAL
HOT & CHILLED WATER SYSTEM AIR CONDITIONERS
First check the contents of the package.
FACTORY SUPPLIED ACCESSORIES
Check to ensure all factory supplied accessories are supplied with the unit.
The appliance should be installed in accordance with national wiring regulation.
SAFETY CONSIDERATIONS
1. When working on air conditioning equipment, observe precautions in this manual, and on
plates and tables attached to the unit. Follow all safety codes and other safety
precautions that may apply.
2. Installing and servicing air conditioning equipment should be done by trained and
qualified service personnel only. Untrained personnel can perform only basic
maintenance functions such as cleaning coils, filters and replacing filters.
3. Ensure that the electrical supply and frequency are adequate for the operating current
required for this specific installation.
WARNING
- Before any service or maintenance operations turn off the main power switch.
1. The manufacturer denies any responsibility and warranty shall be void if these installation
instructions are not observed.
2. Never switch off the power main supply when unit is operating in the cooling cycle. To
switch off the fan coil unit use only the ON-OFF button.
3. This avoids over-flow in the drain pan, by allowing the pump to drain any condensate
water due to regulating valve losses when chiller is working.
OPERATING LIMITS
1. Power supply
Volt Phase Hz
230 1 50
2. Water
circuit
 Minimum entering water temperature: +2 °C
 Maximum entering water temperature: +80 °C
 Water side maximum pressure: 1400 kPa (142 m.w.c)
FACTORY SUPPLIED ACCESSORIES AMOUNT
LCD Remote control 1
Mounting Bracket (Already on the unit) 1
Installation manual 1
Batteries 2
External drain pan
1