Fisher CAMERACORDER FVD-C1 Instruction Manual Download

Page: 104 / 176

101

English

PRINT SETTINGS (STILL IMAGES ONLY)

Specify whether the date is
displayed on the print, and the
number of prints.

<Specifying dated prints>

Toggle the SET button up or down
to select “DATE”.

Press the SET button.

The Print Date Screen appears.

Toggle the SET button up or down
to select the desired option.

YES:

Print the date.

NO:

Do not print the date.

Press the SET button.

You are returned to the Date/
Number Print Screen.

<Specifying the number of prints>

Toggle the SET button up or down
to select “COPIES”.

Press the SET button.

The Print Number Screen
appears.

Toggle the SET button up or down
to specify the number of prints.

Toggle the SET button up or
down until the desired number of
prints is displayed.

Press the SET button.

You are returned to the Date/
Number Print Screen.

ALL IMAGES

SETTINGS

DATE

COPIES:

DATE:

ALL IMAGES

SETTINGS

DATE:

COPIES

COPIES:

SX613EX̲Fisher.book 101 ページ２００３年１０月３日金曜日午後５時１８分

Summary of Contents for CAMERACORDER FVD-C1

















































































































































































Search results

Summary of Contents for CAMERACORDER FVD-C1

Reviews:

Related manuals for CAMERACORDER FVD-C1

Brands by name

Popular brands

Fisher CAMERACORDER FVD-C1, Instruction Manual

Search results

Summary of Contents for CAMERACORDER FVD-C1

Reviews:

Related manuals for CAMERACORDER FVD-C1

Brands by name

Popular brands