Fisher CAMERACORDER FVD-C1 Instruction Manual Download

Page: 100 / 176

English

EDITING VIDEO CLIPS

Press the SET button.

The two video clips are saved together as a separate video clip.

If “NO” was selected in step

, the original video clips are erased when

the joined video clip is saved.

Press the MENU button, or select the

icon and press the SET

button, to return to the Playback Setting Screen.

Extracting a still image from a video clip

While video clip playback is paused, you save a still image of the paused
scene.

Display the frame (paused) you wish to save as a single still image.

Select the edit video icon

from the EXPERT Mode Playback

Setting Screen, and press the SET button.

The Edit Video Screen appears.

Select the save frame icon

, and press the SET button.

The frame that is currently displayed is saved as a still image.

Note

If the original video clip is protected, even if you select “YES” in step

and

press the SET button, the original video clip will not be erased. If you want it
to be erased, you will need to first remove the protection.

SX613EX̲Fisher.book 97 ページ２００３年１０月３日金曜日午後５時１８分

Summary of Contents for CAMERACORDER FVD-C1

















































































































































































Search results

Summary of Contents for CAMERACORDER FVD-C1

Reviews:

Related manuals for CAMERACORDER FVD-C1

Brands by name

Popular brands

Fisher CAMERACORDER FVD-C1, Instruction Manual

Search results

Summary of Contents for CAMERACORDER FVD-C1

Reviews:

Related manuals for CAMERACORDER FVD-C1

Brands by name

Popular brands