background image

Owner's Manual  

with Assembly Instructions

 

For Models W6215 and X3421

Product features may vary from the picture above.

Please read this manual and save it with your original sales receipt.

Tools needed for assembly: Assembly tool (included)  

and Phillips Screwdriver (not included). Tool needed to access battery compartment:  

Slotted screwdriver (not included)

Use only with a Power Wheels

®

 6 Volt (4.0 Amp/Hr.) Rechargeable  

Battery with Built-in Thermal Fuse and a Power Wheels

®

 6 Volt  

(4.0 Amp/Hr.) Charger (both included).

Or contact your local 

independently owned and operated

 

Power Wheels

®

 Authorized Service Center.

For the location nearest you, visit us on-line at 

www.powerwheels.com

.

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052 U.S.A. 

©2011 Mattel, Inc. All Rights Reserved. 

®

 and ™ designate U.S. trademarks of Mattel, Inc. unless otherwise indicated.

 

PRINTED IN MEXICO 

00989pr-1079

Before first-time use,  

you must charge the battery  

18 hours!

Charge the battery immediately after each use.

Charge the battery once a month, even if the vehicle is not used or stored.

Do not return  

your vehicle to the store!

We're a toll-free phone call away, and we can help. 

 If you are missing parts or need assistance, please call:

1-800-348-0751

Summary of Contents for Lil' Quad W6215

















Reviews: