background image

10

00989pr-1079

Motor  

Connector

Battery 

Connector

• Plug the battery connector into the motor connector.

Hint: 

If the battery connector will not plug into the 

motor connector, turn it over and try again! Do not force 

the battery connector into the motor connector.

Lock Fastener

• Using a slotted screwdriver, turn the lock fastener 

1

/

4

 

turn to the locked position 

.

IMPORTANT!

 Always remember to keep the lock 

fastener locked at all times to prevent children from 

accessing the battery.

Slot

Seat Tab

• Insert the front tab on the seat into the slot in  

the vehicle.

Locked

5

7

6

BATTERY INSTALLATION

 RIDING HAZARD

• 

Prevent Injuries and Deaths

    • Direct Adult Supervision Required
    • Never Ride at Night.
    •  Keep Children Within Safe  

Riding Areas. 

      These areas must be:
   

- away from swimming pools and 

other bodies of water to prevent 

drownings     

   

- generally level to prevent tipovers

   

- away from steps, cars, steep 

inclines, roads and alleys. 

    • Riding Rules

   

Make sure children know and 

follow these rules for safe driving 

and riding.

   

- Always sit on the seat.

   

- Always wear shoes.

   

- Only 1 (one) rider at a time.    

SAFE DRIVING RULES AND VEHICLE OPERATION

Use vehicle on generally level ground 

ONLY!

Summary of Contents for Lil' Quad W6215

















Reviews: