8
00989pr-1079
• Fit the lock nut (rounded side up) on to the end of the
steering column.
• Tighten the lock nut firmly with the assembly tool.
Steering Column
Lock Nut
Steering
Column
Cap
• Turn the vehicle upright.
• Pull the handlebar up to be sure the steering column
is secure.
• If you can remove the steering column, you have not
assembled the steering column correctly. Please refer
back to Assembly steps 2-4.
• Plug the handlebar connector into the motor connector.
• Replace the seat (refer to step 6 on page 10).
Motor
Connector
Handlebar
Connector
Assembly Tool
Rounded Side Up
SIDE VIEW
REAR VIEW
3
5
6
•
“Snap”
the steering column cap to the front wheel
assembly.
4
ASSEMBLY
IMPORTANT!
Use only a Power Wheels
®
6 volt
(4.0 Amp/Hr) rechargeable battery. Use of any other
battery will damage your vehicle.
• Loosen the screw in the battery retainer and remove it.
• Locate the lock fastener in the back end of the seat.
• Using a slotted screwdriver, turn the lock fastener
1
/
4
turn to the unlocked position
.
• Lift the seat from the vehicle.
Unlocked
1
2
PULL UP
