Problem
Solution
You hear static or buzzing
Receiver is out of range of transmitter. Move receiver closer
to transmitter.
Note:
Range varies depending on surrounding conditions such
as noise levels, physical obstructions and signal interference.
Transmitter power is off. Turn transmitter power on.
Channel switches are on different channels. Make sure
channel switches on both transmitter and receiver are
set to same channel.
Loose power cord connection and transmitter power is off.
Check transmitter power cord plug-to-outlet connection.
No power to wall outlet and transmitter power is off. Make
sure light switch that controls power flow to wall outlet is on.
Power is off because circuit breaker for room is off. Make sure
house fuses and circuit breakers are on.
Receiver power indicator does not light
Receiver power is off. Turn receiver power on.
Batteries in receiver are weak or dead. Replace all batteries
with three,
alkaline
“AAA” (LR03) batteries or use AC adaptor
as power source.
Power is off because circuit breaker for room is off. Make sure
house fuses and circuit breakers are on.
No power to wall outlet and power is off. Make sure light
switch that controls power flow to wall outlet is on.
Receiver low battery indicator lights
Batteries in receiver are weak or dead. Replace all batteries
with three,
alkaline
“AAA” (LR03) batteries or use AC adaptor
as power source.
Transmitter power indicator does not light
Transmitter power is off. Turn transmitter power on.
Loose power cord connection and transmitter power is off.
Check transmitter power cord plug-to-outlet connection.
No power to wall outlet and transmitter power is off. Make
sure light switch that controls power flow to wall outlet is on.
Power is off because circuit breaker for baby’s room is off.
Make sure house fuses and circuit breakers are on.
You can hear conversations or sounds from
other homes
There is signal interference due to other nursery monitors on
same channel or cordless telephone use. Change channel
switches on both transmitter and receiver to eliminate source
of interference.
Problems & Solutions
Hint:
If, after checking all of these solutions, you believe that your transmitter power cord or AC adaptor are
damaged, please contact Mattel.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A.
PRINTED IN CHINA
©2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
J6998a-0726
