5
Receiver Battery Installation
(Optional)
"AAA" (LR03)
1.5V x 3
• Locate battery compartment door on back of receiver.
• Loosen screw in battery compartment door with a Phillips
screwdriver. Remove battery compartment door.
• Insert three "AAA" (LR03)
alkaline
batteries into the
battery compartment.
• Replace battery compartment door. Tighten screw with a
Phillips screwdriver.
Battery Compartment Door
Battery Compartment Door
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause
a chemical burn injury or ruin your product. To avoid battery leakage:
• Do not mix old and new batteries or batteries of different types:
alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove
exhausted batteries from the product. Dispose of batteries safely.
Do not dispose of this product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removeable, rechargeable batteries are used, they are only to be
charged under adult supervision.
• Protect the environment by not disposing of this
product with household waste (2002/96/EC). Check
your local authority for recycling advice and facilities
(Europe only).
