Power Button
Power Button
6
• Place transmitter in room in which you intend to use it.
• Press transmitter power button to turn power on. Power
indicator lights.
• Set transmitter channel switch to
same
channel as receiver.
Turn on a radio.
Testing Sound Reception
Test transmitter transmission and receiver reception each time you
change location of use.
• Place the receiver in the room in which you intend to use it.
• Turn on/off/volume dial to turn power on. Power indicator lights.
Adjust receiver location for best reception.
Hint:
If battery power is low, the low battery indicator lights.
Replace batteries with three, new
alkaline
“AAA” (LR03) batteries
or use AC adaptor for power source.
On/Off/Volume Dial
Low Battery Indicator
Low Battery Indicator
On/Off/Volume Dial
• Sound lights turn on when sound is received by the receiver.
- One or two lights for shallow sounds.
- Three or more lights for louder sounds.
• If you experience interference (buzzing or static, etc.) while using
one channel setting, switch all units to other channel. Selecting a
channel is usually a one time adjustment.
Hint:
You will see all five sound lights:
- If you turn receiver power on before transmitter power. You will
also hear static noise. Turn volume down and turn transmitter
power on.
- If the receiver is too far away from the transmitter. Move the
receiver closer to the transmitter.
- If loud sounds are transmitting.
Static
Buzzzz
Adjust Channel
