Receiver Battery Installation
(Optional)
Battery Safety Information
• Locate battery compartment door on back of receiver.
• Loosen screw in battery compartment door with a Phillips
screwdriver. Lift to remove battery compartment door.
• Insert three LR6 ("AA")
alkaline
batteries into the
battery compartment.
• Replace battery compartment door and tighten screw.
Do not over-tighten.
Hint:
We recommend using
alkaline
batteries for longer battery life.
Battery Compartment Door
In exceptional circumstances batteries may leak fluids that
can cause a chemical burn injury or ruin your product. To avoid
battery leakage:
• Do not mix old and new batteries or batteries of different types:
alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always remove
exhausted batteries from the product. Dispose of batteries safely.
Do not dispose of product in a fire. The batteries inside may
explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable, rechargeable batteries are used, they are only to be
charged under adult supervision.
LR6 (AA)
1.5V x 3
•
Protect the environment by not disposing of this product
with household waste (2002/96/EC). Check your local
authority for recycling advice and facilities (Europe only).
