28
Cleaning the pump filter
The pump has a filter to trap foreign objects that enter the washer along with clothing.
The pump filter can be accessed from the front of the washer. This should be cleaned
out approximately once a month.
To clean the filter:
1
Turn the power off and unplug the machine.
2
Use a coin to open the filter cover. Place the edge
of the coin into the slot and tilt upwards whilst
levering the cover open.
3
Unhook the pump outlet hose and pull it out
(about 150mm). Remove the plug and allow any water
(approximately 250ml) to drain into a shallow dish.
4
After the draining process is complete, replace the plug
into the hose and refit the hose back into the housing.
5
Remove the filter by turning anti-clockwise (
A
).
Clean and rinse under a tap. Check the pump filter
cavity for any further obstruction.
6
Replace the filter by turning clockwise until the
turning handle stops in the vertical position,
and cannot be turned further (
A
).
7
Close the filter cover.
Nappy sanitisers/bleach
Nappy sanitisers and bleach are very corrosive to metal surfaces. DO NOT tip the
contents of a nappy bucket into your machine. Rinse and wring items out thoroughly
before placing them in the machine.
IMPORTANT!
●
●
Leave the door of your washer open when it is not in use to allow the washer to
dry out, otherwise it will develop unpleasant odours. Ensure that children and
pets are kept away from the washer when the door is left open so they cannot be
accidentally trapped inside.
●
●
Do not attempt to remove any part of the machine aside from the detergent
dispenser, water hoses, and the pump filter. No other parts are designed to be
removed from the machine for cleaning.
Drain residual water
Removing/replacing filter
Turn filter clockwise until turning
handle stops in vertical position
and tabs meet
A
Tabs
CARING FOR YOUR WASHER
Summary of Contents for WH1060P
Page 1: ...FRONT LOADING CLOTHES WASHER WH1060P model INSTALLATION GUIDE USER GUIDE NZ AU ...
Page 2: ......
Page 4: ......
Page 43: ......
