manualshive.com logo in svg

Fisher & Paykel WH1060P, Installation Manual And User Manual

Share
Download
Fisher & Paykel WH1060P Installation Manual And User Manual Download Page 17

15

CONTROL PANEL

1

POWER

Press to turn the washer ON/OFF.

2

Keylock

Touch to disable all buttons on the display panel, except ‘POWER’ 
button. This prevents accidental button presses.

3

SmartTouch™ 

Control Dial

Rotate to select your desired wash cycle. 

4

Digital display 

screen

Shows the following:

●

●

‘Time to go’ - the remaining time in the cycle that is currently 
running. 

●

●

Delayed start time of wash cycle.

●

●

Notifications if an error is detected or a warning is necessary.

5

Progress lights

Indicate the current status of the wash cycle.

●

●

All lights are illuminated at the start of the wash cycle.

●

●

The light of the current status flashes, and then turns off once 
completed.

6

Less/More

Touch to increase or decrease the delay start time.

7

Wash Temp

Touch to increase or decrease water temperature.

8

Spin Speed

Touch to increase or decrease washer spin speed.

9

Soil Level

Touch to adjust the wash setting to suit the amount of soil in 
your load.

!0

Wash Boost

Touch before wash cycle starts to select ‘Pre Wash’ or ‘Rinse+’.

!1

Options

Touch to access wash cycle options and washer settings.

!2

START/PAUSE

Touch to start or pause the selected wash cycle. 

!3

Add a Garment

Touch to interrupt the wash cycle at any time to add or remove 
a garment. 

2

1

4

3

6

7

8

9

!0

!3

!1

!2

5

Summary of Contents for WH1060P













































Reviews:

No comments

Brands by name

Popular brands

Load more brands