manualshive.com logo in svg

Fisher & Paykel WH1060P, Installation Manual And User Manual

Share
Download
Fisher & Paykel WH1060P Installation Manual And User Manual Download Page 16

14

SAFETY FEATURES

Door lock

The door of your washer will lock once you touch 

 and will stay locked until the 

machine beeps at the end of the cycle, ensuring safety for you and your family while 
your machine is operating.

Unlocking the door during the cycle

You can open the door to add or remove items during the wash simply by touching the 

 button. 

IMPORTANT!

The door will remain locked if the temperature inside the washer is above 60°C and/

or the water level is above the bottom of the door seal (a warning will be displayed in 

these circumstances, refer to ‘Before you call for service’ (page 29)). 

To open the door

1 

Press 

 to pause the washer.

 

–

The door will automatically unlock if the conditions inside the washer are safe. 

 

–

The 

 button and time to go will flash on the screen while the washer is paused. 

2 

Open the door to remove or add garments. 

3 

Close the door and press 

 to resume the cycle.

Opening the door during a power failure

If there is a power failure during a wash cycle 
your washer will stop and the door will remain 
locked. You can unlock the washer door to 
remove your clothes by opening the pump filter 
cover at the bottom right of your washer. Simply 
place a coin or key in the slot and tilt it upwards 
to lever the cover open. Use a tool (ie key or 
screw driver) to pull the door release tab down.

WARNING!

Do not attempt to do this if the water level in 

the washer is above the bottom of the door.

When power is restored, you will need to restart 
your machine by simply pressing ‘POWER’. The 
washer will resume the interrupted wash cycle.

Your washer also has the following protective measures:

●

●

Flood protection — turns off valves and turns pump on if a flood condition is detected.

●

●

Out-of-balance protection — stops and redistributes the load if an unbalanced load 
condition is sensed, and/or slows the spin speed to compensate.

●

●

Excess suds protection — pauses to allow suds to break down before continuing the cycle.

Manual door opening mechanism

Manual door release tab

Summary of Contents for WH1060P













































Reviews:

No comments

Brands by name

Popular brands

Load more brands