manualshive.com logo in svg

Fisher & Paykel WH1060P, Installation Manual And User Manual

Share
Download
Fisher & Paykel WH1060P Installation Manual And User Manual Download Page 15

13

BEFORE YOUR FIRST WASH

Before you start, mark ( 

 

)

 

accordingly if you have gone through the 

checklist below:

1

  Have the packaging and transit bolts been removed?

2

  Is the drain hose threaded through the hose guide ‘U bend’ (with no more 

than 20mm extended) and hooked into your standpipe or tub, or attached 
to a spigot?

3

  Is the hot water hose connected to the hot valve (colour-coded orange)? 

4

  Is the cold water hose connected to the cold valve (colour-coded grey)?

5

  Have the taps been turned on?

6

  Is the machine correctly levelled, feet are locked and cabinet corners clear 

of the floor and walls?

5

  Has the power cord been connected to an appropriate power supply 

and the power turned on?

6

  Have you performed the installation test cycle?

7

  We recommend that you complete your first cycle of use without a load 

and only a half-dose amount of detergent in order to remove any residues 
remaining in the machine from the manufacturing process.

IMPORTANT!

You must ensure all 4 transit bolts have been removed from your washer before 

you start using it. If the transit bolts are not removed, they will damage your washer 

and YOUR MANUFACTURER’S WARRANTY WILL BE COMPROMISED.

Summary of Contents for WH1060P













































Reviews:

No comments

Brands by name

Popular brands

Load more brands